TechCrunch | The New York Times | The Verge | Ars Technica | TechCrunchThe new version of Cargo Ship paints the hull of a vessel using the same paints used on ships.
This makes it a lot easier to apply to the hull, allowing you to quickly get the job done.
The paint can be applied in a number of ways, but I’ve found that it best to paint the hull in a spray booth, where you can get a good feel for how it’ll look.
Here’s how I did it.
The painting method you choose to use is up to you, but the main steps are:1.
Paint a layer of paint onto the hull.2.
Paint your ship on top of the paint.3.
Paint the paint over the paint using a spray can.
I used a clear coat to make sure I had enough to cover the entire ship, but any good paint will do.
The paint should also be clean enough to dry completely before you start painting.4.
Paint on a second coat of paint, this time over the hull layer.5.
Paint over the third coat of painting.
Looks like this:And this:Now that you’ve got a paint job done, the next step is to add some details.
In the above picture, I’m using some paint to make the hull look a little bit less rough.
I added some lines to the sides of the ship to give it a little more dimension.
Here are a few more shots to show the effect.
To finish, I added a bit of foam to make it look like the ship is floating on the water.
I didn’t add any lines to help with the shading, so you could easily mess it up if you wanted.
The finished result looks like this.
The new paint version of the Cargo Ship is a little pricier, at $2,000.
But it comes with a few advantages over the old one.
First of all, you can paint the whole ship at once.
It also lets you use a spraycan to apply the paint to the whole hull.
And the paint doesn’t get too heavy or messy, so it doesn’t need to be washed before use.
The downside is that it’s a little harder to use the new paint than the old paint, so if you have a paint booth, it might be worth considering.